How should the port wire rope be maintained?

Maintenance method of wire rope:

1. In order to prolong the service life of the wire rope, the following three methods should not occur: dragging and throwing at will; Sudden change of lifting speed; Frequent impact loads.

2. Dust and rust are the enemies of the steel wire rope. Regularly brush the dust on the steel wire rope carefully with a steel wire brush, and coat all parts of the steel wire rope with oil to prevent rusting.

3. The oil coating cycle of the steel wire rope is once every 4 months. The temperature of the oil used must be around 50 ℃. The oil shall soak the whole rope core and wipe off the unused grease.

4. The steel wire rope shall be coiled and stacked, and shall not be overlapped or placed in a dirty and wet place.

5. In order to avoid loose and loose rope ends, the top of the wire rope must be tightened or welded firmly.

6. In the process of use, if there are oil drops on the surface of the steel wire rope, it means that the steel wire rope has been used. The quality of the steel wire rope is an important factor for the service life of the steel wire rope. Wire skipping is the phenomenon that one or more steel wires cross and bulge in the strand of the steel wire rope or are in the shape of bow or ring. This defect is mainly caused by the hard bending of the steel wire on the bobbin or the improper distance between the winding reel and the rotary forming roller. In addition, such defects may occur when the wire pressing shoe is too large and the steel wire on the I-wheel is not uniform